Swiss-type CNC lathes have the combined functions of turning and milling. They are especially suitable for the processing tasks of large-volume, multi-variety, high-precision long and thin shafts and small complex rotating parts. It pays attention to the production rate and precision of small parts, and various technical parameters. And performance indicators reach the level of similar machine tools, processing small precision parts and complex combined parts, diameter φ2 ~ φ15, φ4 ~ φ20 and other specifications, various model specifications, divided into the following types.

Basic type-can be turned to process external circles, arcs, cones, spheres, end faces, boring, internal/inch threads, grooving, drilling, knurling, push-pull grooves, rigid tapping and other processes. It is suitable for a wide range of processing materials, such as cold drawn or polished bars, square drawn light profiles, triangular or special-shaped profiles, and smooth PVC profiles. Material range: copper, aluminum and other non-ferrous metals, easy car iron, stainless steel, such as SUS303, SUS314, SUS416, 45#, 40Cr, titanium alloy, pure tungsten (HRC60 hardness) and other materials are suitable for processing.

The compound is equipped with a side processing function system, in addition to the processing type and material range, it can also be adapted to the compound of the side processing. Such as milling polyhedrons, milling grooves, milling chutes, milling arc surfaces, side drilling and rigid tapping, lettering and other complex processing procedures.

Compared with ordinary CNC lathes, the differences are:

The material is moving, and the knife machine moves on the knife machine.

1: A clamping spindle can rotate a part with a length of 130mm. If it is a car part with a length of 5mm, the car can be turned by the center, but more than 20 parts can be turned by the center and the feeding needs to be stopped.

2: When the centering lathe is cutting, the material is always fixed close to the position, so the rigidity is very good. When you think about your lathe clamping parts, the tool is stuck in the clamping position and needs to be rotated a few millimeters. What will the rigidity be? degree.

3: The centering car is a kind of turning and milling, and the complexity of processing and shaping is incomparable with the cutter machine (there are old-fashioned automatic cars, which we commonly call the cam locomotive bed). And now many CNC automatic lathes), we call it a centering lathe or a slitting lathe. The spindle Z moves forward and backward, and the knife can move X and Y, which can realize three-dimensional processing and one-time forming.